|Non-Confidential||PDF version||ARM DUI0446Z|
|Home > Working with the Target Configuration Editor > Target configuration editor - Configurations tab|
A tabular view that enables you to:
Define rules to control the enabling and disabling of memory blocks using target registers. You specify a register to be monitored, and when the contents match a given value, a set of memory blocks is enabled. You can define several map rules, one for each of several memory blocks.
Define power domains that are supported on your target.
The following settings are available in the Memory Map Configurations group:
Name of the rule (mandatory).
User-friendly name for the rule.
Associated control register (mandatory).
Mask value (mandatory).
Value for a condition (mandatory).
Condition that changes the control register mapping (mandatory).
The Power Domain Configurations group
The following settings are available in this group, and all are mandatory:
Name of the power domain.
User-friendly name for the rule:
An associated control register that you have previously created.
Value for a condition.
The power state of the power domain:
Mandatory fields are indicated by an asterisk. Toolbar buttons and error messages are displayed in the header panel as appropriate.