4.10 Creating a power domain for a target

Describes how to create a power domain configuration for your target.

Prerequisites

Before you create a power domain configuration, you must first create a control register.

Procedure

  1. Click on the Overview tab.
  2. Select Supported for the Power Domain setting.
  3. Click on the Configurations tab.
  4. Expand the Power Domain Configurations group.
    Figure 4-20 Power Domain Configurations
    Power Domain Configurations


  5. Click New to create a new power domain.
  6. Enter a name in the Unique Name field.
  7. Set the following Wake-up Conditions for the power domain:
    • Register - a list of registers you have previously created

    • Mask

    • Value

    • Power State.

    All settings are mandatory.

Non-ConfidentialPDF file icon PDF versionARM DUI0446Z
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.