4.9.3 Creating a standalone register

Describes how to create a basic standalone register.

Procedure

  1. Click on the Registers tab.
  2. Enter the register data as shown in the following figure.
  3. Bitfield data is entered in a floating table associated with the selected register. Select the Unique name field containing the register name, BRD_SYS_LED.
  4. Click on the Edit Bitfield button in the top right corner of the view.
  5. In the floating Bitfield table, enter the data as shown in the following figure. If required, you can dock this table below the register table by clicking on the title bar of the Bitfield table and dragging it to the base of the register table.
    Figure 4-12 Creating a standalone register
    Creating a standalone register


On completion, close the floating table.

Non-ConfidentialPDF file icon PDF versionARM DUI0446Z
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.