set blocking-run-control

This command controls whether run control operations such as stepping and running are blocked until the target stops or released immediately.

Show/hideSyntax

set blocking-run-control { off | on | script-only}

Where:

off

Specifies asynchronous, control is returned before the target stops.

on

Specifies synchronous, run control operations are blocked until the target stops. This has the same effect as issuing a wait command after each run control operation.

script-only

Specifies that run control operations block only when executed as commands from within a script.

This is the default.

Show/hideExample

Example 102. set blocking-run-control

set blocking-run-control on      # Block run control operations until target stops

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0452L
Non-ConfidentialID100912