reset

This command performs a reset on the target. The exact behavior of the reset command is dependent on the debug agent and the target.

For example:

For more information, see the documentation for your target or debug agent.

Note

Reset does not affect the symbols loaded in the debugger. Registers and memory might contain different values after a reset.

Show/hideSyntax

reset [key]

Where:

key

Specifies the reset key. The reset capabilities are target dependent and might not all be enabled. You can use info capabilities to display a list of capability settings for the target device that is currently connected to the debugger.

Possible options for the reset key are:

app

Application restart.

system

General hardware reset that is not specific to a bus or processor.

If no key is specified then the first enabled reset capability is performed.

Show/hideExample

Example 93. reset

reset                             # Performs the first enabled reset capability
reset app                         # Performs an application restart
reset system                      # Performs a general hardware reset

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0452L
Non-ConfidentialID100912