1.3.212 trace start

Starts the trace capture on the specified trace capture device. If no device is specified, starts trace capture on all connected trace capture devices.

Syntax

trace start [trace_capture_device]

Where:

trace_capture_device

Specifies the trace capture device.

If no trace_capture_device is specified, then all trace capture devices are started.

Example 1-215 Examples

trace start                # starts all connected trace capture devices
trace start ETB            # starts trace capture device named ETB
Non-ConfidentialPDF file icon PDF versionARM DUI0452Z
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.