1.3.207 trace clear

Clears the trace on the specified trace capture device. If no device is specified, clears the trace on all connected trace capture devices.

Note:

Trace capture devices do not support clearing while capture is active.

Syntax

trace clear [trace_capture_device]

Where:

trace_capture_device

Specifies the trace capture device.

If no trace_capture_device is specified, then all trace capture devices are cleared.

Example 1-210 Examples

trace clear                # Stops all connected trace capture devices.
trace clear ETB            # Stops trace capture device named ETB.
Non-ConfidentialPDF file icon PDF versionARM DUI0452Z
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.