1.3.100 mmu print

Prints the contents of a translation table.

Printing translation tables might be slow on some targets because it might involve a full traversal of the translation tables on the target.

Syntax

mmu print [table] [param1=value1]...

Where:

table

Specifies the translation table to print. If you do not specify a table, the command prints all tables for the current translation regime.

param1=value1

Specifies a parameter and its value to govern the interpretation of the table. If you do not specify a required parameter, then it is determined from the current target state.

Example 1-103 Examples

mmu print PL1S_S1_TTBR0
SP:0x80F15000

Input Address | Type          | Next Level      | Output Address  | Properties
------------------------------------------------------------------------------
+ 0x00000000  | TTBR0         | SP:0x0080500000 |                 |
 - 0x00000000 | Fault (x704)  |                 |                 |
 - 0x2C000000 | Section       |                 | SP:0x002C000000 | NS=0, nG=0, S=0
 - 0x2C100000 | Fault (x1343) |                 |                 |
 - 0x80000000 | Section       |                 | SP:0x0080000000 | NS=0, nG=0, S=1
 - 0x80100000 | Fault (x2047) |                 |                 |
+ 0xFFFFFFFF  | TTBR1         | SP:0x009082C300 |                 |
Non-ConfidentialPDF file icon PDF versionARM DUI0452Z
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.