|Non-Confidential||PDF version||ARM DUI0472J|
|Home > Using the Inline and Embedded Assemblers of the ARM Compiler > Differences in compiler support for inline and embedded assembly code|
There are differences between the ways inline and embedded assembly are compiled.
Inline assembly code uses a high level of processor abstraction, and is integrated with the C and C++ code during code generation. Therefore, the compiler optimizes the C and C++ code and the assembly code together.
Unlike inline assembly code, embedded assembly code is assembled separately from the C and C++ code to produce a compiled object that is then combined with the object from the compilation of the C or C++ source.
Inline assembly code can be inlined by the compiler, but embedded assembly code cannot be inlined, either implicitly or explicitly.
The following table summarizes the main differences between inline assembler and embedded assembler.
Table 7-1 Differences between inline and embedded assembler
|Feature||Embedded assembler||Inline assembler|
|Instruction set||ARM and Thumb.||
ARM on all processors.
Thumb on processors with Thumb-2 technology.
|ARM assembler directives||All supported.||None supported.|
|ARMv6 instructions||All supported.||
Supports most instructions, with some exceptions, for example
|ARMv7 instructions||All supported.||Supports most instructions.|
|VFP and NEON instructions||All supported.||VFPv2 only.|
|C/C++ expressions||Constant expressions only.||Full C/C++ expressions.|
|Optimization of assembly code||No optimization.||Full optimization.|
|Register access||Specified physical registers are used. You can also use
Uses virtual registers. Using
|Return instructions||You must add them in your code.||Generated automatically. (The
||Supported directly.||Not supported.|