6.12 Instruction width diagnostics

The assembler can issue a warning when it assembles a Thumb branch instruction to a 32-bit encoding when it could have used a 16-bit encoding.

If you use the .W specifier, the instruction is encoded in 32 bits even if it can be encoded in 16 bits. You can use a diagnostic warning to detect when a branch instruction could have been encoded in 16 bits, but has been encoded in 32 bits. To do this, use the following command-line option when invoking the assembler:

armasm --diag_warning 1607

Note:

This diagnostic does not produce a warning for relocated branch instructions, because the final address is not known. The linker might even insert a veneer, if the branch is out of range for a 32-bit instruction.

Non-ConfidentialPDF file icon PDF versionARM DUI0473M
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.