11.134 STC and STC2

Transfer Data between memory and Coprocessor.

Syntax

op{L}{cond} coproc, CRd, [Rn]

op{L}{cond} coproc, CRd, [Rn, #{-}offset] ; offset addressing

op{L}{cond} coproc, CRd, [Rn, #{-}offset]! ; pre-index addressing

op{L}{cond} coproc, CRd, [Rn], #{-}offset ; post-index addressing

op{L}{cond} coproc, CRd, [Rn], {option}

where:

op

is one of STC or STC2.

cond

is an optional condition code.

In ARM code, cond is not permitted for STC2.

L

is an optional suffix specifying a long transfer.

coproc

is the name of the coprocessor the instruction is for. The standard name is pn, where n is an integer in the range 0 to 15.

CRd

is the coprocessor register to store.

Rn

is the register on which the memory address is based. If PC is specified, the value used is the address of the current instruction plus eight.

-

is an optional minus sign. If - is present, the offset is subtracted from Rn. Otherwise, the offset is added to Rn.

offset

is an expression evaluating to a multiple of 4, in the range 0 to 1020.

!

is an optional suffix. If ! is present, the address including the offset is written back into Rn.

option

is a coprocessor option in the range 0-255, enclosed in braces.

Usage

The use of these instructions depends on the coprocessor. See the coprocessor documentation for details.

Architectures

STC is available in all versions of the ARM architecture.

STC2 is available in ARMv5T and above.

These 32-bit Thumb instructions are available in ARMv6T2 and above.

There are no 16-bit versions of these instructions in Thumb.

Register restrictions

You cannot use PC for Rn in the pre-index and post-index instructions. These are the forms that write back to Rn.

You cannot use PC for Rn in Thumb STC and STC2 instructions.

ARM STC and STC2 instructions where Rn is PC, are deprecated in ARMv6T2 and above.

Non-ConfidentialPDF file icon PDF versionARM DUI0473M
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.