11.167 UMULL

Unsigned Long Multiply, with 32-bit operands, and 64-bit result.

Syntax

UMULL{S}{cond} RdLo, RdHi, Rn, Rm

where:

S

is an optional suffix available in ARM state only. If S is specified, the condition flags are updated based on the result of the operation.

cond

is an optional condition code.

RdLo, RdHi

are the destination registers. RdLo and RdHi must be different registers.

Rn, Rm

are ARM registers holding the operands.

Operation

The UMULL instruction interprets the values from Rn and Rm as unsigned integers. It multiplies these integers and places the least significant 32 bits of the result in RdLo, and the most significant 32 bits of the result in RdHi.

Register restrictions

Rn must be different from RdLo and RdHi in architectures before ARMv6.

You cannot use PC for any register.

You can use SP in ARM instructions but this is deprecated in ARMv6T2 and above. You cannot use SP in Thumb instructions.

Condition flags

If S is specified, this instruction:

  • Updates the N and Z flags according to the result.

  • Does not affect the C or V flags.

Architectures

This ARM instruction is available in all versions of the ARM architecture.

This 32-bit Thumb instruction is available in ARMv6T2 and above.

There is no 16-bit version of this instruction in Thumb.

Example

    UMULL       r0, r4, r5, r6
Non-ConfidentialPDF file icon PDF versionARM DUI0473M
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.