9.7 Conditional execution of VFP instructions

You can execute VFP instructions conditionally, in the same way as most ARM and Thumb instructions.

In ARM state, you can use a condition code to control the execution of VFP instructions. The instruction is executed conditionally, according to the status flags in the APSR, in the same way as almost all ARM instructions.

In Thumb state, you can use an IT instruction to set condition codes on up to four following VFP instructions.

Non-ConfidentialPDF file icon PDF versionARM DUI0473M
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.