3.4 --bincombined_base=address

Enables you to lower the base address used by the --bincombined output mode. The output file generated is suitable to be loaded into memory starting at the specified address.

Syntax

--bincombined_base=address

Where address is the start address where the image is to be loaded:

Default

By default the start address of the first load region in memory is used as the base address.

Restrictions

You must use --bincombined with this option. If you omit --bincombined, a warning message is displayed.

Example

--bincombined --bincombined_base=0x1000

Non-ConfidentialPDF file icon PDF versionARM DUI0477M
Copyright © 2010-2016 ARM Limited or its affiliates. All rights reserved.