Troubleshooting your DSTREAM unit

If you encounter problems when using your DSTREAM unit, confirm that your DSTREAM unit is booting properly.

The power-on sequence is:

  1. The DSTREAM backlight illuminates blue.

  2. The FLASH LED flashes as accesses take place.

  3. The STATUS LED flashes green and then stays illuminated, and the blue power LED on the DSTREAM probe illuminates.

  4. If the target is connected and powered, the TARGET LED illuminates green, and the appropriate VTREF LED on the DSTREAM probe illuminates.

The unit has now booted.

Errors are indicated as follows:

Note

The DHCP LED is accessible via the access panel on the underside of the unit.

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0481F
Non-ConfidentialID021112