ARM® DS-5 ARM DSTREAM User Guide

Version 5


Table of Contents

Preface
About this book
Using this book
Glossary
Typographic conventions
Feedback
Other information
1 Introduction to ARM DSTREAM
1.1 About DSTREAM
1.2 DSTREAM product contents
1.3 DSTREAM availability and compatibility
1.4 The DSTREAM unit
1.5 The DSTREAM probe
1.5.1 DSTREAM probe connectors
1.6 Installing the USB drivers for your debug hardware unit
1.7 The DSTREAM firmware
1.8 The DSTREAM host software
1.9 Troubleshooting your DSTREAM unit
1.10 DSTREAM unit boot sequence
1.11 Restoring a DSTREAM unit that fails to boot
2 System requirements for using ARM DSTREAM
2.1 Requirements for connecting the DSTREAM unit
2.2 Connecting the DSTREAM unit
2.3 About hot-plugging and unplugging the debug cable
2.4 About tracing with DSTREAM
2.5 Tracing with DSTREAM

List of Figures

1-1 Rear of DSTREAM unit
1-2 Front of DSTREAM unit
1-3 Indicator LEDs
1-4 DSTREAM probe
2-1 Connecting the DSTREAM hardware

Release Information

Document History
Issue Date Confidentiality Change
A May 2010 Non-Confidential First release
B November 2010 Non-Confidential Second release
C 30 April 2011 Non-Confidential DSTREAM and RVI v4.2.1 Release
D 29 July 2011 Non-Confidential Update 1 for DSTREAM and RVI v4.2.1
E 30 September 2011 Non-Confidential DSTREAM and RVI v4.4 Release
F 29 February 2012 Non-Confidential Update for DS-5 version 5.9
G 29 July 2012 Non-Confidential Update for DS-5 version 5.11
H 12 October 2012 Non-Confidential Update for DS-5 version 5.12
I 20 March 2015 Non-Confidential Update for DS-5 version 5.21
J 15 July 2015 Non-Confidential Update for DS-5 version 5.22

Non-Confidential Proprietary Notice

This document is protected by copyright and other related rights and the practice or implementation of the information contained in this document may be protected by one or more patents or pending patent applications. No part of this document may be reproduced in any form by any means without the express prior written permission of ARM. No license, express or implied, by estoppel or otherwise to any intellectual property rights is granted by this document unless specifically stated.
Your access to the information in this document is conditional upon your acceptance that you will not use or permit others to use the information for the purposes of determining whether implementations infringe any third party patents.
THIS DOCUMENT IS PROVIDED “AS IS”. ARM PROVIDES NO REPRESENTATIONS AND NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE DOCUMENT. For the avoidance of doubt, ARM makes no representation with respect to, and has undertaken no analysis to identify or understand the scope and content of, third party patents, copyrights, trade secrets, or other rights.
This document may include technical inaccuracies or typographical errors.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ARM BE LIABLE FOR ANY DAMAGES, INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF ARM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This document consists solely of commercial items. You shall be responsible for ensuring that any use, duplication or disclosure of this document complies fully with any relevant export laws and regulations to assure that this document or any portion thereof is not exported, directly or indirectly, in violation of such export laws. Use of the word “partner” in reference to ARM’s customers is not intended to create or refer to any partnership relationship with any other company. ARM may make changes to this document at any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any signed written agreement covering this document with ARM, then the signed written agreement prevails over and supersedes the conflicting provisions of these terms. This document may be translated into other languages for convenience, and you agree that if there is any conflict between the English version of this document and any translation, the terms of the English version of the Agreement shall prevail.
Copyright © [2010-2012, 2015], ARM Limited or its affiliates. All rights reserved.
ARM Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
LES-PRE-20349

Confidentiality Status

This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to.
Unrestricted Access is an ARM internal classification.

Product Status

The information in this document is Final, that is for a developed product.

Web Address

Conformance Notices

This section contains conformance notices.

Federal Communications Commission Notice

This device is test equipment and consequently is exempt from part 15 of the FCC Rules under section 15.103 (c).

Class A

Important: This is a Class A device. In residential areas, this device may cause radio interference. The user should take the necessary precautions, if appropriate.

CE Declaration of Conformity

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.
The system should be powered down when not in use.
It is recommended that ESD precautions be taken when handling DSTREAM, RVI, and RVT equipment.
The DSTREAM, RVI, and RVT modules generate, use, and can radiate radio frequency energy and may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off or on, you are encouraged to try to correct the interference by one or more of the following measures:
  • ensure attached cables do not lie across the target board
  • reorient the receiving antenna
  • increase the distance between the equipment and the receiver
  • connect the equipment into an outlet on a circuit different from that to which the receiver is connected
  • consult the dealer or an experienced radio/TV technician for help

Note

It is recommended that wherever possible shielded interface cables be used.
Non-ConfidentialPDF file icon PDF versionARM DUI0481J
Copyright © 2010-2012, 2015 ARM. All rights reserved.