1.5 The DSTREAM probe

The DSTREAM probe unit allows DSTREAM to interface with all commonly-used debug and trace interfaces provided on a target.

The probe connects to the main DSTREAM unit by a 100mm high-density ribbon cable. An optional 2m cable is available. When connecting to the target, select the appropriate connectors on the probe to match the connectors on the target. Cables for each of these connectors are supplied with DSTREAM. At any one time, use only the cables that are to be connected to the probe unit for the current debug trace session.
Related concepts
1.4 The DSTREAM unit
1.7 The DSTREAM firmware
1.8 The DSTREAM host software
Related tasks
1.9 Troubleshooting your DSTREAM unit
Related reference
1.5.1 DSTREAM probe connectors
Non-ConfidentialPDF file icon PDF versionARM DUI0481K
Copyright © 2010-2012, 2015 ARM. All rights reserved.