1.6 Installing the USB drivers for your debug hardware unit

When you connect your debug hardware unit to a USB port for the first time after installing ARM DS-5, the Found New Hardware Wizard is displayed.

To install the USB drivers for your debug hardware unit:

Procedure

  1. Click Next.
  2. Select Install from a list or a specific location (Advanced).
  3. Click Next.
  4. Select Search for the best driver in these locations.
  5. Select Include this location in the search:.
  6. Enter the following path in the text box:
    DS-5_install_directory\sw\driver_files\platform
    
    where:
    DS-5_install_directory
    is the directory where DS-5 is installed.
    platform
    is either x64 or x86.
  7. After the USB drivers are installed, click Finish.
Non-ConfidentialPDF file icon PDF versionARM DUI0481K
Copyright © 2010-2012, 2015 ARM. All rights reserved.