1.10 DSTREAM unit boot sequence

Your DSTREAM unit goes through a boot sequence when you power it up. The progress of the boot sequence is identified by various LEDs.

The DSTREAM unit follows this boot sequence:
  1. The DSTREAM backlight illuminates blue.
  2. The FLASH LED flashes as accesses take place.
  3. The STATUS LED flashes green and then stays illuminated, and the blue power LED on the DSTREAM probe illuminates.
  4. If the target is connected and powered, the TARGET LED illuminates green, and the appropriate VTREF LED on the DSTREAM probe illuminates.
    The unit is now ready for use.
Related concepts
1.4 The DSTREAM unit
1.5 The DSTREAM probe
Related tasks
1.9 Troubleshooting your DSTREAM unit
Non-ConfidentialPDF file icon PDF versionARM DUI0481K
Copyright © 2010-2012, 2015 ARM. All rights reserved.