2.4 About tracing with DSTREAM

DSTREAM is capable of capturing trace data into a cyclic buffer, and you can define the buffer size up to a maximum of 4GB.

When a sufficient amount of trace data has been captured to fill the buffer, the FULL LED illuminates. The buffer then wraps, continues to capture trace data, and overwrites the original trace data captured.
You can stop trace capture by using a trigger condition or a manual stop, and you can configure the amount of trace captured after a trigger event.

Note

See the DS-5 debugger documentation for details of the trace capabilities, and for configuring trace.
Related concepts
2.1 Requirements for connecting the DSTREAM unit
2.3 About hot-plugging and unplugging the debug cable
1.4 The DSTREAM unit
Related tasks
2.2 Connecting the DSTREAM unit
Related information
Using the Debugger
Debugger Command Reference
Non-ConfidentialPDF file icon PDF versionARM DUI0481K
Copyright © 2010-2012, 2015 ARM. All rights reserved.