1.11 Starting a capture session

When you have the gator daemon and optionally, the gator driver, up and running, you are ready to run a capture session using Streamline.

To initiate a capture session, follow these steps:

Procedure

  1. Select a target using the Connection Browser dialog. You open this dialog by clicking the Browse for a target button . Alternatively, enter an IP address in the Address field at the top of the Streamline Data view.
    If you have an Android target and use the ADB to forward the port, enter localhost in the Address field. This field is automatically populated if you selected an Android device connected using ADB in the Connection Browser dialog.
  2. Click the Start capture button.
    Figure 1-1 Starting a capture session
    Starting a capture session

If an up-to-date version of gator is running on your target, Live view opens and begins plotting capture data on the bar graphs in real time.
Related tasks
1.5 Preparing and building your Linux kernel
1.7 Building the gator daemon
1.8 Building the gator module
1.9 Running the gator daemon on your target
1.10 Connecting to an Android target using Ethernet
Related reference
1.3 Streamline prerequisites
2.5 Connection Browser dialog box
12.1 Troubleshooting target connection issues
3.2 Capture & Analysis Options dialog box settings
Non-ConfidentialPDF file icon PDF versionARM DUI0482U
Copyright © 2010-2015 ARM. All rights reserved.