Identifying a debug hardware unit

If you have multiple debug hardware units on a network, you can identify the unit you want to access from the configuration utility.

To identify the debug hardware unit you want to access:

  1. Select a unit from the list, or enter an IP address of a unit if it is on a different network.

  2. Click Identify.

    The identification indicators on the selected debug hardware unit flash for 5 seconds. If you have selected the wrong unit, select another unit from the list and repeat this step.

    Note

    On RVI, all LEDs on the front panel flash during identification.

    On DSTREAM, the DSTREAM logo flashes during identification.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D
Non-ConfidentialID071311