Configuring CoreSight processors

The following figure shows an example of the CoreSight device settings for a processor:

Figure 50. CoreSight device settings for a processor

CoreSight device settings for a processor

The following configuration items are available when configuring CoreSight processors:


This is the index of the AP in the Debug Access Port (DAP) that must be used to access the CoreSight debug registers for the CoreSight component.

CoreSight base address (CORESIGHT_BASE_ADDRESS)

This is the base address of the CoreSight debug registers on the bus that is accessed through the AP as specified in the CoreSight AP Index configuration item.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D