USB server not accessible

The following error message is displayed if a communication error occurs between RVConfig and the USB server application:

Figure 59. Error message when no USB devices present

Error message when no USB devices present

The USB server might not be accessible because:

Note

If you do not want to use a USB connection, then use the debug hardware unit over a TCP/IP connection. If you have not yet done so:

  1. Connect the unit to your network.

  2. Configure the network settings for the unit.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D
Non-ConfidentialID071311