Preparing your debug hardware for remote GDB connections

To prepare debug hardware to accept remote GDB connections and be able to communicate with a GDB session, you must:

  1. Create a debug hardware configuration file for your develpoment system.

  2. Use the rvigdbconfig command-line utility and specify:

    • the debug hardware configuration file you created in step 1

    • DCC parameters, if necessary.

  3. Use GDB to:

    • load the image symbols if required

    • connect to the processor.

    You might have to specify a port number if your system has multiple processors.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D
Non-ConfidentialID071311