Trace configuration settings

The Trace configuration settings enable you to configure delays on the trace lines:

Delay Trace Clock, Delay Trace Signal N

Delay line N by a specified amount of time, expressed in intervals of 75 picosecond. Default delays are configured into the unit, and you are able to delay each signal by a specified amount relative to these defaults, to allow for variations in target hardware.

Invert Trace Clock

Invert the clock so that data is sampled on the falling edge, rather than on the rising edge, of the clock.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D
Non-ConfidentialID071311