Select Platform dialog box

The Select Platform dialog box enables you to select a platform configuration that is suitable for your development platform. The following figure shows an example:

Figure 25. Select Platform dialog box

Select Platform dialog box

Click the OK button to select the chosen platform, in doing so the entire configuration for that platform is loaded.

Click the Cancel button to cancel any selected action.

Select <None> to put the debug hardware unit into a known state if you have incorrectly loaded a platform. This resets all settings to the default values.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0498D
Non-ConfidentialID071311