Starting the debug hardware configuration utilities

How you start the required debug hardware configuration utility depends on:

Note

For information about debugging with your own debugger, see your debugger documentation.

Show/hideStarting the Debug Hardware Config utility on Windows

To start the required debug hardware configuration utility on Windows platforms:

  1. Select Start → All Programs → ARM DS-5 → Debug Hardware

  2. Select the option for the utility you want to use:

    • select Debug Hardware Config IP to start the RVI Config IP utility

    • select Debug Hardware Configuration to start the Debug Hardware Config utility

    • select Debug Hardware Update to start the RVI Update utility.

For more information, see the ARM DS-5 documentation.

Show/hideStarting the Debug Hardware Config utility on Red Hat Linux

To start the required debug hardware configuration utility on Red Hat Linux platforms, select the appropriate shortcut. The shortcut depends on the version of Red Hat Linux and the desktop environment that you are using.

If no desktop shortcut is available, at the command-line:

  1. Make sure the paths to the utilities are configured. See Getting Started for DS-5 for more details.

  2. Enter the command for the utility you want to use:

    • enter rviconfigip to start the RVI Config IP utility

    • enter rvconfig to start the Debug Hardware Config utility

    • enter rviupdate to start the RVI Update utility.

Show/hideAccessing the Debug Hardware Config utility from your Debugger

You can access the Debug Hardware Config utility directly from your debugger. See the DS-5 Debugger documentation for details on how to do this.

Show/hideSee also

Copyright © 2010-2012 ARM. All rights reserved.ARM DUI 0498G
Non-ConfidentialID071612