DSTREAM reset signals

The DSTREAM unit has two reset signals connected to the debug target hardware:

The target hardware must pull the reset lines to their inactive state to assure normal operation when the JTAG interface is disconnected. In the DSTREAM unit, the strong pull-up/pull-down resistance is approximately 33Ω, and the weak pull-up/pull-down resistance is approximately 4.7kΩ. Because you can select the drive strength for nTRST and nSRST, target assemblies with a variey of different reset configurations can be supported.

Show/hideSee also

Concepts
Reference

ARM® DSTREAM™ and RVI™ Using the Debug Hardware Configuration Utilities:

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0499D
Non-ConfidentialID071311