Voltage domains

The DSTREAM probe supports two separate voltage domains to work with debug and trace interfaces on differing voltage rails.

Voltage domain A is used by the following connectors:

Voltage domain B is used by the following connectors:

The MIPI 34 connector is the only one which supports both voltage domains, and is equipped with two VTREF pins to achieve the correct logic levels.

The VTREF A and VTREF B LEDs on the probe indicate when targets have been detected in the respective voltage domains.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0499D
Non-ConfidentialID071311