About the TI JTAG 14 connector

The TI JTAG 14 connector can be used in either standard JTAG (IEEE 1149.1) mode or Serial Wire Debug (SWD) mode.

The following figure shows the TI JTAG 14 connector pinout:

Figure 15. TI JTAG 14 connector pinout

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

Show/hideSee also

Copyright © 2010-2012, 2015 ARM. All rights reserved.ARM DUI 0499I