About the CoreSight 10 connector

The CoreSight 10 connector can be used in either standard JTAG (IEEE 1149.1) mode or Serial Wire Debug (SWD) mode.

The following figure shows the CoreSight 10 connector pinout:

Figure 17. CoreSight 10 connector pinout

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Note

A polarizing key is fitted only at the target end of the cable.

Show/hideSee also

Copyright © 2010-2012, 2015 ARM. All rights reserved.ARM DUI 0499I
Non-ConfidentialID031715