About the User I/O connector

The User Input/Output (I/O) connector is situated on an end panel of the DSTREAM unit. The connector is a 10-way 2.54mm pitch Insulation Displacement Connector (IDC) header that mates with IDC sockets mounted on a ribbon cable, as shown in the following figure.

Figure 29. User I/O pin connections

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Warning

You must establish a common ground between the DSTREAM unit and the target hardware before you connect any of the User I/O signals.

Show/hideSee also

Reference

Setting Up the ARM DSTREAM™ Hardware:

Copyright © 2010-2012, 2015 ARM. All rights reserved.ARM DUI 0499I
Non-ConfidentialID031715