Probes, dimensions and keep out areas

The following figure shows a single-connector Trace probe in RVT attached to a target board:

Figure 15. Probe dimensions

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Caution

The Mictor connector is not robust. It is recommended that the plastic shroud is fitted around the target connector. This part is not supplied as standard with RVT.

The Mictor connector support shroud is available from Agilent as Part Number E5346 - 44701.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0517D
Non-ConfidentialID071311