Dual-Mictor trace probe characteristics

The spacing between the dual connectors is shown in the following figure.

Figure 19. Dual-Mictor pitch dimensions

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.

The pitch tolerance is 0.1mm.


If connection is to be made to a target that does not fulfil these position requirements, the Dual Mictor Extender Cable Kit (Part Number RT200-CB-00032), comprising two Mictor extender cables, can be used to connect the probe to the target. For more information on the Cable Kit, contact your supplier.

Single-length extender cables have a rating of 400Mbps.

Show/hideSee also

Copyright © 2010-2011 ARM. All rights reserved.ARM DUI 0517D