AMBA-PV Extensions to OSCI TLM 2.0 Reference Manual
Copyright © 2009 ARM Limited. All rights reserved.
About this document
This document provides a reference for the classes and interfaces included in the AMBA-PV Extensions to OSCI TLM 2.0 (AMBA-PV). These classes and interfaces provide a Programmer's View (PV) of the AMBA® 3 buses.
This document is written for experienced hardware and software developers to aid the development of OSCI TLM 2.0 compatible models that communicate over AMBA 3 buses.
You must be familiar with:
- the basic concepts of C++ such as classes and inheritance
- SystemC and TLM 2.0 standards.
This section lists related publications by ARM and by third parties.
See http://infocenter.arm.com for access to ARM documentation.
The following publications provide reference information about AMBA and the ARM architecture:
- AMBA 3 APB Protocol Specification (ARM IHI 0022)
- AMBA AXI Protocol Specification (ARM IHI 0022)
- AMBA Specification (ARM IHI 0011)
- ARM Architecture Reference Manual (ARM DDI 0100).
The following publications provide information about related ARM products and toolkits:
- AMBA-PV Extensions to OSCI TLM 2.0 Developers Guide (ARM DUI 0455).
This section lists relevant documents published by third parties.
See http://www.systemc.org for further information on the Open SystemC Initiative (OSCI).
The following publications provide reference information about SystemC and the TLM 2.0 OSCI standard:
- IEEE Std 1666-2005, SystemC Language Reference Manual, 31 March 2006
- OSCI, TLM 2.0 Language Reference Manual, July 2009
ARM welcomes feedback both on this product and on the documentation.
Feedback on this product
If you have any comments or suggestions about this product, contact your supplier and give:
- the product name
- a concise explanation.
Feedback on this manual
If you have any comments on this manual, send an e-mail to
- the title
- the number (ARM DUI 0522A)
- the relevant page number(s) to which your comments apply
- a concise explanation of your comments. ARM also welcomes general suggestions for additions and improvements.
Words and logos marked with ™ or ® are registered trademarks or trademarks owned by ARM Limited, except as otherwise stated below in this proprietary notice. Other brands and names mentioned herein may be the trademarks of their respective owners.
Neither the whole nor any part of the information contained in, or the product described in, this document may be adapted or reproduced in any material form except with the prior written permission of the copyright holder.
The product described in this document is subject to continuous developments and improvements. All particulars of the product and its use contained in this document are given by ARM in good faith. However, all warranties implied or expressed, including but not limited to implied warranties of merchantability, or fitness for purpose, are excluded.
This document is intended only to assist the reader in the use of the product. ARM Limited shall not be liable for any loss or damage arising from the use of any information in this document, or any error or omission in such information, or any incorrect use of the product.
Where the term ARM is used it means "ARM or any of its subsidiaries as appropriate".
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to.
Unrestricted Access is an ARM internal classification.
The information in this document is final, that is for a developed product.
||22 September 2009
||New document for public release.