2.2.2. Running the simulation with Model Debugger

To run a simulation in Model Debugger:

  1. Ensure that you have specified the tarmac trace plug-in that is to be loaded on simulation. See Pointing to the position of the tarmac trace plug-in.

  2. In Model Debugger, select File → Load Model...

  3. Set the file path to the simulation library.

  4. Set the model parameters in the Configure Model Parameters dialog box, as shown in Figure 2.2.

    Figure 2.2. Setting model parameters

    Setting model parameters

    You might set, for example, the trace end count value and the name and location of the trace output file.

  5. Load the application file.

For more information on using the tools, see the Model Debugger for Fast Models User Guide.

Copyright © 2010 ARM Limited. All rights reserved.ARM DUI 0532A
Non-ConfidentialID110210