2.2.12. DDR2 memory interface, SO-DIMM

This is driven by FPGA 1. The SO-DIMM connector supports up to 4GB of 64-bit DDR2 memory expansion. Figure 2.6 shows the generic FPGA to DDR2 memory interconnect.

Application note AN233, LogicTile Express 13MG example design for a CoreTile Express A9x4, contains an example DDR2 controller, netlist only.

Figure 2.6. DDR2 memory interface

To view this graphic, your browser must support the SVG format. Either install a browser with native support, or install an appropriate plugin such as Adobe SVG Viewer.


Copyright © 2010-2014 ARM. All rights reserved.ARM DUI 0556G
Non-ConfidentialID052914