| |||

Home > ARM and Thumb Instructions > General data processing instructions > Shift Operations |

Register shift operations move the bits in a register left
or right by a specified number of bits, the *shift length*.
Register shift can be performed:

directly by the instructions

`ASR`

,`LSR`

,`LSL`

,`ROR`

, and`RRX`

, and the result is written to a destination registerduring the calculation of

by the instructions that specify the second operand as a register with shift. The result is used by the instruction.`Operand2`

The permitted shift lengths depend on the shift type and the
instruction, see the individual instruction description or the flexible
second operand description. If the shift length is 0, no shift occurs.
Register shift operations update the carry flag except when the
specified shift length is 0. The following sub-sections describe
the various shift operations and how they affect the carry flag.
In these descriptions, is
the register containing the value to be shifted, and

`n`

Arithmetic shift right by bits
moves the left-hand

`32`

-`n`

`Rm`

`n`

`32`

-`n`

`n`

You can use the * ASR #* operation
to divide the value in the register

`Rm`

When the instruction is `ASRS`

or when * ASR
#* is used in

`Operand2`

`MOVS`

, `MVNS`

, `ANDS`

, `ORRS`

, `ORNS`

, `EORS`

, `BICS`

, `TEQ`

or `TST`

,
the carry flag is updated to the last bit shifted out, bit[`n`

`Rm`

If

is 32 or more, then all the bits in the result are set to the value of bit[31] of`n`

.`Rm`

If

is 32 or more and the carry flag is updated, it is updated to the value of bit[31] of`n`

.`Rm`

Logical shift right by bits
moves the left-hand

`32`

-`n`

`Rm`

`n`

`32`

-`n`

`n`

bits
of the result to 0. See Figure 2.You can use the * LSR #* operation
to divide the value in the register

`Rm`

When the instruction is `LSRS`

or when * LSR
#* is used in

`Operand2`

`MOVS`

, `MVNS`

, `ANDS`

, `ORRS`

, `ORNS`

, `EORS`

, `BICS`

, `TEQ`

or `TST`

,
the carry flag is updated to the last bit shifted out, bit[`n`

`Rm`

If

is 32 or more, then all the bits in the result are cleared to 0.`n`

If

is 33 or more and the carry flag is updated, it is updated to 0.`n`

Logical shift left by bits
moves the right-hand

`32`

-`n`

`Rm`

`n`

`32`

-`n`

`n`

bits
of the result to 0. See Figure 3.You can use he * LSL #* operation
to multiply the value in the register

`Rm`

When the instruction is `LSLS`

or when * LSL
#*, with non-zero

`n`

`Operand2`

`MOVS`

, `MVNS`

, `ANDS`

, `ORRS`

, `ORNS`

, `EORS`

, `BICS`

, `TEQ`

or `TST`

,
the carry flag is updated to the last bit shifted out, bit[`32`

-`n`

`Rm`

```
LSL
#0
```

If

is 32 or more, then all the bits in the result are cleared to 0.`n`

If

is 33 or more and the carry flag is updated, it is updated to 0.`n`

Rotate right by

bits
moves the left-hand `n`

`32`

- bits
of the register

`Rm`

`n`

`32`

-`n`

`n`

`n`

When the instruction is `RORS`

or when * ROR
#* is used in

`Operand2`

`MOVS`

, `MVNS`

, `ANDS`

, `ORRS`

, `ORNS`

, `EORS`

, `BICS`

, `TEQ`

or `TST`

,
the carry flag is updated to the last bit rotation, bit[`n`

`Rm`

If

is 32, then the value of the result is same as the value in`n`

, and if the carry flag is updated, it is updated to bit[31] of`Rm`

.`Rm`

`ROR`

with shift length,, more than 32 is the same as`n`

`ROR`

with shift length-32.`n`

Rotate right with extend moves the bits of the register to
the right by one bit. And it copies the carry flag into bit[31]
of the result. See Figure 5.

When the instruction is `RRXS`

or when * RRX* is
used in

`Operand2`

`MOVS`

, `MVNS`

, `ANDS`

, `ORRS`

, `ORNS`

, `EORS`

, `BICS`

, `TEQ`

or `TST`

,
the carry flag is updated to bit[0] of the register `Rm`

- Concepts