--diag_suppress=tag{, tag}

Diagnostic messages output by the assembler can be identified by a tag in the form of {prefix}number, where the prefix is A. The --diag_suppress option disables the diagnostic messages that have the specified tags.

You can specify more than one tag with these options by separating each tag using a comma.

For example, to suppress the warning messages that have numbers 1293 and 187, use the following command:

armasm --diag_suppress=1293,187

You can specify the optional assembler prefix A before the tag number. For example:

armasm --diag_suppress=A1293,A187

If any prefix other than A is included, the message number is ignored. Diagnostic message tags can be cut and pasted directly into a command line.

You can also set the tag to:

Show/hideSee also

Copyright © 2011-2012 ARM. All rights reserved.ARM DUI 0588B
Non-ConfidentialID062912