DCI

In ARM code, the DCI directive allocates one or more words of memory, aligned on four-byte boundaries, and defines the initial runtime contents of the memory.

In Thumb code, the DCI directive allocates one or more halfwords of memory, aligned on two-byte boundaries, and defines the initial runtime contents of the memory.

Show/hideSyntax

{label} DCI{.W} expr{,expr}

where:

expr

is a numeric expression.

.W

if present, indicates that four bytes must be inserted in Thumb code.

Show/hideUsage

The DCI directive is very like the DCD or DCW directives, but the location is marked as code instead of data. Use DCI when writing macros for new instructions not supported by the version of the assembler you are using.

In ARM code, DCI inserts up to three bytes of padding before the first defined word, if necessary, to achieve four-byte alignment. In Thumb code, DCI inserts an initial byte of padding, if necessary, to achieve two-byte alignment.

You can use DCI to insert a bit pattern into the instruction stream. For example, use:

DCI 0x46c0

to insert the Thumb operation MOV r8,r8.

Show/hideExample macro

    MACRO           ; this macro translates newinstr Rd,Rm
                    ; to the appropriate machine code
    newinst     $Rd,$Rm
    DCI         0xe16f0f10 :OR: ($Rd:SHL:12) :OR: $Rm
    MEND

Show/hide32-bit Thumb example

    DCI.W   0xf3af8000   ; inserts 32-bit NOP, 2-byte aligned.

Show/hideSee also

Concepts

Using the Assembler:

Reference
Copyright © 2011-2012 ARM. All rights reserved.ARM DUI 0588B
Non-ConfidentialID062912