4.6 __enable_fiq intrinsic

This intrinsic enables FIQ interrupts.

To use this intrinsic, your source file must contain #include <arm_compat.h>. This is only available for targets in AArch32 state.

Note:

Typically, this intrinsic enables FIQ interrupts by clearing the F-bit in the CPSR. However, for v7-M and v8-M.mainline, it clears the fault mask register (FAULTMASK). This intrinsic is not supported in v6-M and v8-M.baseline.

Syntax

void __enable_fiq(void)

Restrictions

The __enable_fiq intrinsic can only be executed in privileged modes, that is, in non-user modes. In User mode this intrinsic does not change the interrupt flags in the CPSR.

Non-ConfidentialPDF file icon PDF versionDUI0774J
Copyright © 2014–2017, 2019 Arm Limited or its affiliates. All rights reserved.