13.173 UHASX

Unsigned halving parallel add and subtract halfwords with exchange.

Syntax

UHASX{cond} {Rd}, Rn, Rm

where:

cond

is an optional condition code.

Rd

is the destination general-purpose register.

Rm, Rn

are the general-purpose registers holding the operands.

Operation

This instruction exchanges the two halfwords of the second operand, then performs an addition on the two top halfwords of the operands and a subtraction on the bottom two halfwords. It halves the results and writes them into the corresponding halfwords of the destination. This cannot cause overflow.

Register restrictions

You cannot use PC for any operand.

You can use SP in A32 instructions but this is deprecated. You cannot use SP in T32 instructions.

Condition flags

This instruction does not affect the N, Z, C, V, Q, or GE flags.

Availability

The 32-bit instruction is available in A32 and T32.

For the Armv7‑M architecture, the 32-bit T32 instruction is only available in an Arm®v7E-M implementation.

There is no 16-bit version of this instruction in T32.

Non-ConfidentialPDF file icon PDF versionDUI0801J
Copyright © 2014–2017, 2019 Arm Limited or its affiliates. All rights reserved.