20.107 LD3 (vector, multiple structures)

Load multiple 3-element structures to three registers.

Syntax

LD3 { Vt.T, Vt2.T, Vt3.T }, [Xn|SP] ; No offset

LD3 { Vt.T, Vt2.T, Vt3.T }, [Xn|SP], imm ; Immediate offset, Post-index

LD3 { Vt.T, Vt2.T, Vt3.T }, [Xn|SP], Xm ; Register offset, Post-index

Where:

Vt
Is the name of the first or only SIMD and FP register to be transferred.
Vt2
Is the name of the second SIMD and FP register to be transferred.
Vt3
Is the name of the third SIMD and FP register to be transferred.
imm
Is the post-index immediate offset, and can be either #24 or #48.
Xm
Is the 64-bit name of the general-purpose post-index register, excluding XZR.
T
Is an arrangement specifier, and can be one of 8B, 16B, 4H, 8H, 2S, 4S or 2D.
Xn|SP
Is the 64-bit name of the general-purpose base register or stack pointer.

Usage

Load multiple 3-element structures to three registers. This instruction loads multiple 3-element structures from memory and writes the result to the three SIMD and FP registers, with de-interleaving.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Non-ConfidentialPDF file icon PDF versionDUI0801J
Copyright © 2014–2017, 2019 Arm Limited or its affiliates. All rights reserved.