19.19 FACGT (scalar)

Floating-point Absolute Compare Greater than (vector).

Syntax

FACGT Hd, Hn, Hm ; Scalar half precision

FACGT Vd, Vn, Vm ; Scalar single-precision and double-precision

Where:

Hd
Is the 16-bit name of the SIMD and FP destination register.
Hn
Is the 16-bit name of the first SIMD and FP source register.
Hm
Is the 16-bit name of the second SIMD and FP source register.
V
Is a width specifier, and can be either S or D.
d
Is the number of the SIMD and FP destination register.
n
Is the number of the first SIMD and FP source register.
m
Is the number of the second SIMD and FP source register.

Architectures supported (scalar)

Supported in the Arm®v8.2 architecture and later.

Usage

Floating-point Absolute Compare Greater than (vector). This instruction compares the absolute value of each vector element in the first source SIMD and FP register with the absolute value of the corresponding vector element in the second source SIMD and FP register and if the first value is greater than the second value sets every bit of the corresponding vector element in the destination SIMD and FP register to one, otherwise sets every bit of the corresponding vector element in the destination SIMD and FP register to zero.

This instruction can generate a floating-point exception. Depending on the settings in FPCR, the exception results in either a flag being set in FPSR, or a synchronous exception being generated. For more information, see Floating-point exception traps in the Arm® Architecture Reference Manual Arm®v8, for Arm®v8‑A architecture profile.

Depending on the settings in the CPACR_EL1, CPTR_EL2, and CPTR_EL3 registers, and the current Security state and Exception level, an attempt to execute the instruction might be trapped.

Non-ConfidentialPDF file icon PDF versionDUI0801J
Copyright © 2014–2017, 2019 Arm Limited or its affiliates. All rights reserved.