17.7 LDADDAB, LDADDALB, LDADDB, LDADDLB

Atomic add on byte in memory.

Syntax

LDADDAB Ws, Wt, [Xn|SP] ; Acquire general registers

LDADDALB Ws, Wt, [Xn|SP] ; Acquire and release general registers

LDADDB Ws, Wt, [Xn|SP] ; No memory ordering general registers

LDADDLB Ws, Wt, [Xn|SP] ; Release general registers

Where:

Ws
Is the 32-bit name of the general-purpose register holding the data value to be operated on with the contents of the memory location.
Wt
Is the 32-bit name of the general-purpose register to be loaded.
Xn|SP
Is the 64-bit name of the general-purpose base register or stack pointer.

Architectures supported

Supported in the Arm®v8.1 architecture and later.

Usage

Atomic add on byte in memory atomically loads an 8-bit byte from memory, adds the value held in a register to it, and stores the result back to memory. The value initially loaded from memory is returned in the destination register.

  • If the destination register is not WZR, LDADDAB and LDADDALB load from memory with acquire semantics.
  • LDADDLB and LDADDALB store to memory with release semantics.
  • LDADDB has no memory ordering requirements.

For more information about memory ordering semantics see Load-Acquire, Store-Release in the Arm® Architecture Reference Manual Arm®v8, for Arm®v8‑A architecture profile.

For information about memory accesses see Load/Store addressing modes in the Arm® Architecture Reference Manual Arm®v8, for Arm®v8‑A architecture profile.

Non-ConfidentialPDF file icon PDF versionDUI0801J
Copyright © 2014–2017, 2019 Arm Limited or its affiliates. All rights reserved.