4.3.20 Self Port dialog

Use this dialog to add a port to the top-level component.

To display the dialog, without having anything selected in the Block Diagram view, click Add Ports, or click Add Port from the Object menu.

Instance name

The name of the port.

Array size

The number of ports, for a port array. Leave the box empty, or enter 1, for normal ports.

Protocol

The name of the protocol for the port. To display a list of protocols, click Select....

Type

Master port or Slave Port.

Attributes
  • Addressable for bus ports.

  • Internal for ports between subcomponents. The port is not visible if the component is added to a system.

Create LISA method templates according to selected protocol

Select an option from the drop-down list to create implementation templates for methods, or behaviors, for the selected protocol:

  • Do not create method templates.

  • Create only required methods. This is the default.

  • Create all methods, including optional behaviors.

This creates only methods corresponding to the selected port type, that is, for either master or slave.

Editing the existing port might create new methods, but does not delete existing methods.

Mirror port image

Reverse the direction of the port image.

Non-ConfidentialPDF file icon PDF versionARM DUI0835I
Copyright © 2014-2016 ARM Limited or its affiliates. All rights reserved.