AMBA-PV Extensions to TLM Reference Manual
Copyright © 2014-2016 ARM Limited. All rights reserved.
About this document
This document provides a reference for the classes and interfaces included in the AMBA-PV Extensions to TLM 2.0 (AMBA-PV). These classes and interfaces provide a Programmer's View (PV) of the AMBA buses.
This document is written for experienced hardware and software developers to aid the development of TLM 2.0 compatible models that communicate over AMBA buses.
You must be familiar with:
- the basic concepts of C++ such as classes and inheritance
- SystemC and TLM standards.
This section lists related publications by ARM and by third parties.
See http://infocenter.arm.com for access to ARM documentation.
The following publications provide reference information about AMBA and the ARM architecture:
- AMBA AXI Protocol Specification (ARM IHI0022)
- AMBA AHB-Lite Protocol Specification (ARM IHI0033)
- AMBA APB Protocol Specification (ARM IHI0024)
- AMBA Specification (ARM IHI0011)
- ARM Architecture Reference Manual (ARM DDI0100).
The following publications provide information about related ARM products and toolkits:
- AMBA-PV Extensions to TLM Developers Guide (ARM DUI0846).
This section lists relevant documents published by third parties.
See http://www.accellera.org for further information on the Accellera Systems Initiative.
The following publications provide reference information about SystemC and TLM standards:
- IEEE Std 1666-2011, SystemC Language Reference Manual, 9 January 2012.
Feedback on this product
If you have any comments or suggestions about this product, contact your supplier and give:
- The product name.
- The product revision or version.
- An explanation with as much information as you can provide. Include symptoms and diagnostic procedures if appropriate.
Feedback on content
If you have any comments on content, send an e-mail to errata@@arm.com. Give:
- The title AMBA-PV Extensions to TLM Reference Manual
- The number ARM DUI0847E.
- If applicable, the relevant page number(s) to which your comments refer.
- A concise explanation of your comments.
ARM also welcomes general suggestions for additions and improvements.
Non-Confidential Proprietary Notice
This document is protected by copyright and other related rights and the practice or implementation of the information contained in this document may be protected by one or more patents or pending patent applications. No part of this document may be reproduced in any form by any means without the express prior written permission of ARM. No license, express or implied, by estoppel or otherwise to any intellectual property rights is granted by this document unless specifically stated.
Your access to the information in this document is conditional upon your acceptance that you will not use or permit others to use the information for the purposes of determining whether implementations infringe any third party patents.
THIS DOCUMENT IS PROVIDED "AS IS". ARM PROVIDES NO REPRESENTATIONS AND NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE DOCUMENT. For the avoidance of doubt, ARM makes no representation with respect to, and has undertaken no analysis to identify or understand the scope and content of, third party patents, copyrights, trade secrets, or other rights.
This document may include technical inaccuracies or typographical errors.
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ARM BE LIABLE FOR ANY DAMAGES, INCLUDING WITHOUT LIMITATION ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF ANY USE OF THIS DOCUMENT, EVEN IF ARM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This document consists solely of commercial items. You shall be responsible for ensuring that any use, duplication or disclosure of this document complies fully with any relevant export laws and regulations to assure that this document or any portion thereof is not exported, directly or indirectly, in violation of such export laws. Use of the word "partner" in reference to ARM's customers is not intended to create or refer to any partnership relationship with any other company. ARM may make changes to this document at any time and without notice.
If any of the provisions contained in these terms conflict with any of the provisions of any signed written agreement covering this document with ARM, then the signed written agreement prevails over and supersedes the conflicting provisions of these terms. This document may be translated into other languages for convenience, and you agree that if there is any conflict between the English version of this document and any translation, the terms of the English version of the Agreement shall prevail.
Words and logos marked with © or ™ are registered trademarks or trademarks of ARM Limited or its affiliates in the EU and/or elsewhere. All rights reserved. Other brands and names mentioned in this document may be the trademarks of their respective owners. Please follow ARM's trademark usage guidelines at http://www.arm.com/about/trademark-usage-guidelines.php.
Copyright © [2014, 2015], ARM Limited or its affiliates. All rights reserved.
ARM Limited. Company 02557590 registered in England.
110 Fulbourn Road, Cambridge, England CB1 9NJ.
This document is Non-Confidential. The right to use, copy and disclose this document may be subject to license restrictions in accordance with the terms of the agreement entered into by ARM and the party that ARM delivered this document to. Unrestricted Access is an ARM internal classification.
The information in this document is final, that is for a developed product.
|Revision History |
|Revision A ||28 April 2014 ||First release made from document ARM DUI 0522. |
|Revision B ||17 October 2014 ||Second release. |
|Revision C ||27 March 2015 ||Third release. |
|Revision D ||03 December 2015 ||Fourth release. |
|Revision E ||05 May 2016 ||Fifth release. |