FLASH PROGRAMMING UTILITIES
Applies to: C166 C Compiler
Information in this article applies to:
C166 Version 3.12
C166 Version 4.20
MCB167-NET Evaluation Board
How can I program flash devices that are connected on the C16x or
There are several tools available to do this. You might want to
have a look at:
program the 29F040 devices on the Keil MCB167-NET board with the
BootLoad (Btld) utility, you must make the following
PC Port: Select PC Interface which is used for download
with 38600 Baud.
usconfigurations: BUSCON0 = 0x04AD, SYSCON = 0x0084, all
other BUSCON/ADDRSEL set to 0x0.
Target Memory: Load to Flash. Flash Base Address = 0x0,
Flash Size in Bytes = 0x100000.
Controller: C167 / Derivatives.
After Loading...: Jump to Address : 0x0.
Before Loading...: Erase flash before loading = YES.
Flash Algorithm: 2 AMD Embedded: 29F010, 29F040,
Article last edited on: 2001-11-05 00:00:00
Rate this article
Disagree? Move your mouse over the bar and click