ARM Technical Support Knowledge Articles

CONFIGURATION FOR CYGNAL DEVICES

Applies to: RTX51 Real-time Kernel

Answer


Information in this article applies to:


QUESTION

I am using the Cygnal C8051F020 and the Keil CA51 V7.00 and RTX51 V.700. What are the Device Type Number and Timer that I need to set in the RTX Configuration?

ANSWER

RTX51 Version 7.00 supports the following Processor Types for the Cygnal devices. Note that you may use Timer 0 or Timer 1 but Timer 2 is not supported as a system timer.

Cygnal Device       CPU Number
------------------------------
C8051F005/6/7       39 [*2]
C8051F015/16/17     39 [*2]
C8051F020/21/22/23  43 [*2]
C8051F206           40 [*2]
C8051F226           40 [*2]
C8051F236           40 [*2]
------------------------------

[*2] Timer 2 not supported as System Timer

Refer to the RTX51 List of Supported Devices for a complete list of the chips that are supported.

SEE ALSO

Article last edited on: 2005-03-02 15:11:55

Rate this article

[Bad]
|
|
[Good]
Disagree? Move your mouse over the bar and click

Did you find this article helpful? Yes No

How can we improve this article?

Link to this article
Copyright © 2011 ARM Limited. All rights reserved. External (Open), Non-Confidential